Tuesday, 23 September 2014

Reupholster A Dining Chair Seat

Reupholstering a dining chair seat is easier than you might think.


You may be thinking about reupholstering a dining chair seat or several dining room chairs to match the decor that is currently in your dining room. Reupholstering a dining room chair is easier than you think and it only takes a half hour or so. Here's reupholster a dining chair seat: Does this Spark an idea?


Instructions


1. Use a screwdriver to unscrew the seat from the dining chair.


2. Remove the existing upholstery from the dining chair seat. This step is optional since it sometimes involves removing the padding underneath. It is perfectly fine to put the new fabric over the old when reupholstering a dining room chair.


3. Measure the dining chair seat and cut the fabric to size for reupholstering. Be sure to allow for at least 4-6 inches to wrap around the back of the seat.


4. Lay the fabric wrong side up on a flat surface. Place the dining chair seat on top of it (bottom up), aligning the pattern as necessary.


5. Fold one side over and staple it to the back of the dining chair seat. Be sure not to staple over the screw holes. Repeat this step until all four sides and corners of the seat are stapled. Pleat the corners for best results during reupholstering.


6. Place the reupholstered dining chair seat back into the dining chair and screw it back in.

Tags: chair seat, dining chair, dining chair seat, dining room, dining chair