A garage door opener remote allows you to open or close your garage door with the touch of a single button and without ever having to exit your vehicle. These convenient devices may be obtained from your garage door opener's manufacturer at the time of installation or ordered later as an optional accessory. If your garage door opener remote didn't come preprogrammed, synchronize it to the main unit in just seconds. Does this Spark an idea?
Instructions
1. Find the "Learn" or "Learn Code" button on your garage door opener's main overhead unit. Note that this button may be found on the sides or bottom of the unit, depending on your model.
2. Depress and release the "Learn" or "Learn Code" button on the overhead unit. Look for a flashing light emitting diode indicator or listen for a beep to confirm that the overhead unit has entered the programming mode.
3. Decide which remote control button you want to use to control your garage door. Depress and release that button within 30 seconds of pressing the "Learn" or "Learn Code" button.
4. Wait for the LED indicator to go out or listen for a beep to confirm the garage door opener remote programming.
Tags: garage door, garage door opener, door opener, your garage, your garage door, Code button