If you have a pepper tree in your yard, you can trim it back to remove dead branches. A single pepper tree can take at least two years to become established, according the City of Los Angeles Street Services Division. Pepper trees need little pruning or trimming, and the practice is usually used only to remove dead wood or for minor thinning of the tree. Exposing green, living tree tissue during the pepper tree trimming process can increase the chances of disease in pepper tree. Pepper trees typically only grow in warmer states in the United States, such as California, Texas and Florida. While some types of pepper tree are desired, like the California or Peruvian pepper tree, other types of pepper tree, like the Brazilian pepper tree, are considered invasive pests. Does this Spark an idea?
Instructions
1. Examine the tree for any dead wood. Dead wood is typically brittle and will snap if bent.
2. Remove any dead wood from the tree using a pole tree trimmer or pruner. Trim the dead wood on a diagonal at the apex where one branch meets another.
3. Trim away any smaller, thinner branches around the base of the tree and around the trunk with a set of heavy pruning shears or hand trimmers.
4. Remove branches hanging less than 1/4 inch from the ground with a pole tree trimmer. Trim the branches diagonally at the point where one branch shoots off another.
5. Prune branches which can create problems later, such as crossing or rubbing branches, with the pole tree pruner, if needed.
Tags: dead wood, pepper tree, pepper tree, pole tree, Pepper trees, pole tree trimmer, remove dead